QINGDAO YAOSEN MARINE INDUSTRIAL EQUIPMENT CO.,LTD

Favorite  |  Set Home
skype: S.L.BLUESEA
QQ: 672098863
E-mail: sales@slbluesea.com
Product name : CQ22-J Marine Galley exhaust fan
Model : CQ22-J
Casing Material : Q235 CARBON STEEL
Impeller Material : ZL104 CAST ALUMINUM
Brand : YAOSEN MARINE
MOQ : 1 SET
←[Previous Product]              [Next Product]→
Online Inquiry         Email Us

  Details:
Dia.Size:420 mm
Air flow rate:9000 M3/H
Pressure: 1960PA
Power:11 KW
Frequency: 50/60HZ
Brand:Yaosen Marine
------------------------------------------------------------------------------------------------------------------------------------------------------------
 CQ22-J Marine Galley exhaust fan
CQ Series Marine High pressure Centrifugal Fan
 
1. FOREWORD
CQ22-J Marine Galley exhaust fan is capable of blowing air, ocean air containing salt vapour, and corrosive air which contains oil vapour and a small quantity of acid steam generated by the natural evaporation of the batteries. So it can be used for ventilation of various machinery room and each compartment of boats and ships as well as other likes spaces.
The ventilator is designed and manufactured according to GB11865-89(Marine centrifugal fans) and the Rules and Regulations for the Construction and classification of Sea-going Steed ships approved by the Register of the People’s Republic of China.

2. WORKING CONDITIONS
CQ22-J Marine Galley exhaust fan
Medium temperature: -25℃ ~ +50℃
Max relative humidity: 95%
Periodical swing: ±22.5°
Continued transversal incline: ±15°
Continued longitudinal incline:±10°
Vibration: existent
I
mpact:  existent

3. CHARACTERISTICS
CQ22-J Marine Galley exhaust fan
Small size and light weight.
Low-noise ,low vibration.
Good anti-corrosiveness.
Good air tightness 
Small starting torque.
Strong resistance against swing, vibration and impact.

4. STRUCTURE TYPE
CQ22-J Marine Galley exhaust fan is designed and manufactured into a horizontal structure type or a vertical one, which the vane wheel is mounted directly on the motor shaft extension.
The vane wheel, being riveting structure is made of aluminum alloy and carefully balanced by static and dynamic ways.
Both the machine casing and the inlet are made of welded common steel . 
The ventilator can be made for left or right rotation:
Left rotation-viewed from the motor side, the vane wheel rotates clock-wise and indicated as “L”.
Right rotation-viewed from the motor side, the vane wheel rotates clockwise and indicated as “R”.
The outlet position of ventilator, according to the rotating direction of vane wheel, is made into the following main types. In conformity with the requirement, the outlet position is allowed to use other types, the step angle of which is 30°or 22.5°.
The ventilator can be matched with marine AC motor of 380V.50HZ or marine motor DC 220V.

5. Introduction for ordering
5.1 Please introduce the model, flow prate, pressure, speed and structure of fan、50HZ or 60HZ..
5.2 Please offer insulation class and protection class for fan motor (if not, the insulation class is B, protection class is IP44).
5.3 Our factory can offer the fans of special specification and usage according to the user's demands.
5.4 We are responsible for the repair, exchange and return of the products Within 18 months. 

6. Use and maintenance
6.1 Before installing the fans, should check whether each part is intact, whether the components are complete, whether the impeller and casing rotating direct are concordant.
6.2  The air enter the fan from axial direction and come out through the impeller. It can be used for left or right rotation.
6.3  When installing the duct of the inlet and should make the duct and fans be spontaneous 
outlet, identical, not join them forcing, not bring the weight of duct on the fans.
6.4 After installed the fans, check whether there is friction of collide between the impeller and the fixed parts by rotating the impeller. If collision, friction, loud noise or strong vibration happened, the fan should be restart after checking. Avoid the fan being bumped and other substance or liquid entered the fans. Please clean the dust on blade of impeller in time, so as not to break the balance and 
strengthen the noise.
6.5 The fans should be start-up without load. 

7. Outline dimensions

 

Please contact us and get detailed Technical parameters and Drawings.

We could Design and Produce the Marine fan,Industrial Fan,and Other Ventilation Equipment according to your detailed requirement !

  Related Products :

CQ9-J High pressure centrifugal blower fan
CQ9-J High pressure centrifugal blower fan

CQ5-J Ship centrifugal exhaust fan
CQ5-J Ship centrifugal exhaust fan

CQ25-J Marine high pressure Centrifugal blower
CQ25-J Marine high pressure Centrifugal blower

CQ21-J Marine industrial fan
CQ21-J Marine industrial fan

CQ17-J Ship air ventilator fan
CQ17-J Ship air ventilator fan

CQ13-J Oil tanker ventilation fan
CQ13-J Oil tanker ventilation fan

CQ6-J Ship centrifugal blower fan
CQ6-J Ship centrifugal blower fan

CQ2-J Marine High pressure Centrifugal fan
CQ2-J Marine High pressure Centrifugal fan

Online service

Skype: S.L.BLUESEA 672098863 sales@slbluesea.com steven@slbluesea.com